LAS VEGAS, NEVADA: TransAudio Group, the U.S. distributor for ATC (Acoustic Transducer Company) audio reference speakers, introduces the U.K. manufacturer’s first ever compact active three-way studio control monitor – the SCM25A Pro. Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the ATC SCM25A Pro offers very high-performance in the most compact possible form factor.

The SCM25A Pro incorporates ATC’s proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, more

LAS VEGAS, NEVADA: TransAudio Group has announced the introduction of the Daking FET3, a new dual-channel limiter incorporating Class A discrete compressor circuitry and gain stages that is built in the U.S. by Geoffrey Daking. The FET3 builds on the quality and performance benchmarks set by the renowned Daking FET II single-channel limiter while adding several unique front panel features for enhanced user control.

The Daking FET3 design utilizes the same audio path and detector circuits as the FET II limiter, which has become highly regarded for its speed, high performance and unique ability to sound great on an extraordinary variety of sources. The FET3 adds new variable high-pass filters – from 0 to 200 Hz – at the detector stage to improve and customize the behavior of each limiter channel. Signal content below the user set HPF frequency will not trigger the more

NEW YORK, NEW YORK: TUBE-TECH introduces the new RM 2, a new two-slot rack that vertically accommodates any two TUBE-TECH M Series tube-based modules. The new two RU frame enables the user to own multiple TUBE-TECH modules and one small two-channel rack, offering the sound of TUBE-TECH in a smaller and less expensive package than ever before. The RM-2 is unique in that it is designed from the ground up for tubes. The power supply and internal voltage rails are specifically built for tube-based electronics, offering much higher supply voltages than the modular 500 racks can offer. This new two-slot RM2 rack, along with the existing eight-vertical slot RM8 rack, expands the flexibility of TUBE-TECH while lowering the per channel cost.

The PM 1A module combines an exceptionally smooth sounding microphone preamplifier and direct more

LAS VEGAS, NEVADA: TransAudio Group, the worldwide distributor for Bock Audio, is introducing the new BOCK 50 omni-tube microphone at the 127th AES Convention in New York. Focused on a tradition that stretches back to classical orchestral recording microphones of the 1950s, the Bock omni-directional Bock 50 is similarly intended to capture the natural ambience of groups of acoustic instruments, from small ensembles to large orchestras. It is particularly well-suited for use in a Decca Tree configuration. more