Archive of the Convention News Category

GatesAir Optimizes Next-Generation Over-The-Air Platforms at The Radio Show

Advanced HD Radio, intelligent networking architectures combine with high-efficiency performance to accelerate return on investment

CINCINNATI, September 9, 2014
GatesAir, a global leader in over-the-air broadcast solutions for television and radio, comes to The Radio Show this week with its over-the-air efficiency message, exhibiting turnkey solutions to create, transport, deliver and monetize over-the-air radio for AM, FM and HD Radio™ broadcasters. With advanced new platforms for digital multichannel and intelligent IP networking on display, GatesAir’s vision delivers high-efficiency solutions that accelerate ROI and new revenue streams while providing the lowest total cost of ownership.

Many sessions at The Radio Show, taking place Wednesday-Friday at the Indiana Convention Center in Indianapolis, will focus on launching, operating and maintaining a successful digital radio service. At the GatesAir booth (303, Exhibit Hall D), broadcasters can learn how the company’s latest HD Radio solutions support these initiatives while simplifying operations and launching new business opportunities. GatesAir will showcase its innovative line of Flexiva analog and digital transmitters incorporating the Gen 4 Exgine architecture for multichannel HD Radio program transport and delivery, building on its long legacy of innovation in HD Radio broadcasting that dates to the first IBOC tests in the 1990s.

The complete GatesAir Gen 4 Exgine integrates all pertinent signal processing and transport solutions with the industry’s most cost- and power-efficient transmitters, bringing toward an all-in-one, networked solution from the company’s market-leading Flexiva portfolio. The Gen 4 Exgine architecture is ideal for broadcasters facing the challenges associated with HD Radio power level increases, where power utilization, bandwidth, noise and interference challenges can affect efficiency, quality and compliance. The GatesAir Gen 4 Exgine platform enables higher HD Radio power levels through advanced digital signal processing and efficient broadband transmitter designs, increasing headroom while reducing signal distortion and eliminating interference. These improvements ensure an enjoyable experience for listeners who appreciate the high-quality, multichannel experience that HD Radio provides, while helping broadcasters increase market share and monetize digital services through improved coverage and performance.

GatesAir will also showcase intelligent networking solutions for contribution and distribution. The company’s Flexiva range of on-air and production solutions for studio facilities, including multi-destination routing architectures with networked consoles and accessories, enhance creativity and collaboration across studios while reducing infrastructure, wiring and management complexity. GatesAir will also showcase its latest contribution and distribution solutions for external signal transport, including compact Intraplex® IP Link codecs and the North American debut of Intraplex LiveLook, a new network optimization that strengthens visibility into IP network performance. LiveLook’s real-time, interactive monitoring platform is designed to help broadcasters better comprehend and optimize network performance through in-depth analysis and troubleshooting of IP transport architectures.

About GatesAir
GatesAir, Inc. provides complete solutions for over-the-air radio and television broadcasting, leveraging wireless spectrum to maximize performance for multichannel, mission-critical services. Powering over-the-air networks worldwide with unparalleled reliability for nearly 100 years, GatesAir’s turnkey solutions enable broadcasters to create, transport and transmit radio and TV content. With customers in more than 185 countries, the company leads the industry in innovation and design breakthroughs, improving efficiency and reducing total cost of ownership. Visit www.gatesair.com for more information, and follow us on Twitter at @GatesAir.

# # #

HD Radio™ is a trademark of iBiuqity Digital Corp.

RTW TM3-Primus TouchMonitor Now Shipping Worldwide

Ultra-Compact Meter Enables Extensive Loudness and Audio Metering Capabilities for a Variety of Applications and Budgets

AMSTERDAM, 8 SEPTEMBER, 2014 – RTW (IBC Hall 8, Stand D.92), the market leader in visual audio meters and monitoring devices, is pleased to announce that the TM3-Primus, its new smart series product, is now shipping worldwide. This highly compact model from the award-winning TouchMonitor line provides a full set of easy-to-read instruments for level and loudness metering in commercial and non-commercial production and broadcasting environments. Executives will be available during the 2014 IBC Show to demo the TM3-Primus and discuss its capabilities.

Introduced to the market earlier this year at NAB, the RTW TM3-Primus is a multifunctional audio measurement desktop unit featuring unbalanced RCA type two-channel analog, digital (SPDIF) and USB interfaces. In addition, it features an advanced USB hybrid mode where a metering point in a digital audio workstation (DAW) (implemented using a specific RTW plug-in) can be visualized right on the new TouchMonitor’s screen. Also, a USB port allows for implementing an innovative USB/plug-in hybrid mode that enables metering to be performed on the DAW so that a user can process and visualize the information instantly.

As a compact and low-cost member of the TouchMonitor family, the TM3-Primus is equally suited for professional use in minor or secondary workflows for broadcasting, video editing, music and other recording environments. It offers a new quality solution for non-commercial use in small radio environments or podcasting. Like other models from the award-winning TouchMonitor series, the TM3-Primus comes with a highly intuitive and user-friendly 4.3-inch touchscreen interface that simplifies system handling even for operators without a strong background in audio.

Supported loudness standards include: ITU BS.1770-3/1771-1, ATSC A/85, EBU R128, ARIB, OP-59, AGICOM and CALM. The TM3-Primus includes level and loudness display with bargraph type or numerical readout plus MagicLRA type. Other instruments included with the meter are PPM, moving coil, correlator, RTA, vectorscope, numerical and chart.

About RTW
RTW, based in Cologne (Germany), has nearly 50 years of experience in designing, producing, and marketing advanced recording-studio equipment, leading and innovating the market for high quality audio metering and monitoring tools. RTW operates a worldwide distribution and service network. For more information on RTW, visit www.rtw.com, www.facebook.com/rtw.de or call +49 221 709130.

Hal Leonard Announces The Pensado Papers

The behind the scenes story of Dave Pensado’s and Herb Trawick’s incredible and inspirational journey

Montclair, NJ (September 2, 2014) – Hal Leonard Books, the musician’s best source of books on the music business, audio technology, instrument history, and more, announces the release of The Pensado Papers, written by Dave Pensado, first-call mixing engineer (Beyonce, Christina Aguilera, Kelly Clarkson, Mariah Carey, Elton John, Michael Jackson, and more!) and his manager Herb Trawick.

Pensado_cover

The Pensado Papers is first and foremost about work ethic, passion, and commitment. The authors instill the strong conviction that going beyond expectations will guarantee success on all levels. “To this day, if someone hires me to do something it is rare that I don’t do way more than what I’m paid to do,” writes Pensado.

The Pensado Papers reveals insights into the engineering regime of a recording genius, a creative philosophy that results in achievement and success. Starting from the very beginnings of Dave and Herb’s friendship, the book leads to their top-rated YouTube show, Pensado’s Place, where they discuss important music and audio recording topics with pro audio experts. “Audio is the foundation of Pensado’s Place. But the show is really about creativity,” says Pensado when he talks about the show in the book.

The book is written in a warm conversational tone between two friends, with occasional friendly banter making it even more fun to read. Maureen Droney – editor and long-time friend to Pensado and Trawick – has skillfully captured the likeability, wisdom, and charm that millions of viewers have grown to love about this incredible duo.

Dave Pensado and Herb Trawick will introduce their book at the 137th AES Convention at Los Angeles:

Friday, October 10 at 2 pm
AES Platinum Event with Herb and Dave

Saturday, October 11 at 11 am.
Book signing at the Hal Leonard booth #1141

Praise for The Pensado Papers
“The Pensado Papers is a must-read for anyone who’s ever craved the behind-the-scenes, double-barreled, all-access pass into the music business that only Dave Pensado and Herb Trawick could provide: fiery, insightful, incisive, inspiring, and most importantly, one hell of a good read.” —Nick Messitte, Contributor, Forbes.com

About the Authors
Dave Pensado is a Grammy Award-winning mixing engineer who cut his teeth in Atlanta doing live and studio sound engineering during the 1970s and 1980s. In 1990, he moved to Los Angeles and now mixes between 200 and 250 songs per year. In September 2011, he and Herb Trawick started a weekly show called Pensado’s Place. The show is about engineering techniques and features interviews with guest mixers, producers, and artists, and has enjoyed tremendous success due to the valuable information provided by and their guests. Dave and Herb both live in Los Angeles.

The Pensado Papers – Available October 9, 2014 – PLEASE CONTACT Martina@musicmarcom.com for pre-release review copies!

The Pensado Papers
$29.99 (US)
Inventory #HL 00120020
ISBN: 9781480345690
Width: 7.0″, length: 10.0″, 320 pages

For more information, please visit HalLeonardBooks.com

Prism Sound Releases SADiE Version 6.1

Prism Sound has announced the release of SADiE Version 6.1, an update to its highly acclaimed SADiE Version 6.0.0 recording and editing software.

With no dedicated proprietary hardware requirements the SADiE v 6.1 software packs are application based and focus on the core SADiE expertise of Mastering, Radio Production, TV/Film Post, Archiving and Restoration, and high level Sound Design.

Prism Sound has also announced a new and exceptionally competitive pricing structure for its SADiE software packs. With the entry level SADiE PRO now starting at UK £445.00 (plus VAT), the product range is even more cost effective, taking the SADiE brand, reputation and advantages into new markets. The extended compatibility will also significantly reinforce its appeal to professional users around the world.

New SADiE Features

WAV Master
With many more consumers now choosing to buy their music via a download, record labels are increasingly asking mastering engineers to deliver mastered audio as digital WAV files so they can be easily supplied to audio download sites such as iTunes, Spotify and Amazon.
SADiE’s newly introduced WAV Master feature allows users to create WAV files for an entire album, using PQ marks to define the start and end of the WAV file for each album track. Track Titles, Artist Name and other information is automatically incorporated into these files. As a further extension of its WAV Master feature, SADiE has also introduced a new high quality Sample Rate conversion algorithm. This brings the sample rate conversion process in-line with the high quality processing standards for which SADiE’s parent company, Prism Sound, is famous.

This ultra-efficient workflow allows SADiE’s PQ list to be used as a single source to create the WAVs, DDP and CDs that are required by today’s mastering engineers.

ISRC in BWF Files
Prism Sound has also incorporated ISRC in BWF into SADiE’s new WAV Master option. This feature is included as part of the Mastering Suite and Sound Suite packs.

Created and standardised by the European Broadcasting Union, Broadcast WAV (BWF) is an extended WAV format that allows ISRC data to be embedded in the file. ISRC stands for International Standard Recording Code. Every song released, and every version of that song, is allocated a unique ISRC by the record label. ISRC is then used to ensure that the correct files are used for playback and replication. It also ensures that artists and recording professionals who stand to benefit financially from any playback or replication are identified and compensated.

The UK Music Producer’s Guild has led the initiative to get BWF adopted as standard, and in conjunction with the EBU it has produced a Recommended Practice document that lays out methods by which an ISRC can be embedded into a BWF.

Other updates

These include an extension to SADiE’s Wav Master functionality with support for reading and writing a WAV file’s LIST-INFO chunk, and for Track Name and Artist metadata (included in Mastering Suite and Sound Suite packs). Prism Sound has also incorporated 32bit floating point format for recording or bouncing to WAV or BWF, thus allowing engineers to work at the highest possible resolution throughout. There is also the option of creating a profile when making a DDP Image or importing one.
In addition to these upgrades, Prism Sound is now including SADIE MTR (Multi-Track Recorder) software in the SADIE6 installer. This will run without license when using an LRX2 or Prism Sound Lyra, Titan, and Atlas, interfaces, and requires a license for native operation.
Looking to the future, SADiE will soon be offering enhanced video support for BlackMagic Design Decklink cards, as well as timecode support on SADiE Native systems (where the ASIO audio hardware supports timecode functionality). These extended new features will be included in an imminent service update. The software element of this update will be available to all 6.1 users, although some users may require additional hardware.

To try out the software, please visit http://www.sadie.com/support/download_v6.php

-ends-

About Prism Sound
Founded in 1987, Prism Sound manufacture high-quality professional digital audio equipment for the International broadcast, film, music production, manufacturing and telecommunications sectors. The range now includes SADiE digital audio workstations and location recorders. Prism Sound also manufactures audio test and measurement products such as the DSA-1 and the dScope Series III audio analyzer.

For more information please visit www.sadie.com or www.prismsound.com

Video Devices Product Line Steps into the Spotlight at IBC for the First Time

New Brand Identity from Sound Devices Reinforces Video Product Line

AMSTERDAM, AUGUST 27, 2014 – Video Devices, mission-critical video products by Sound Devices, will make its IBC debut at this year’s exhibition (Hall 8, Stand B59). Since Sound Devices introduced its first video products, the camera-mounted PIX 240i and PIX 220i, the company has expanded on its success with a range of rack-mounted, network-connected video recorders. These product additions, including the new PIX 270i and PIX 250i, have opened new markets and product categories for the company.

“While production sound equipment is our foundation, and we continue to develop new audio gear, video production has become increasingly important for us,” says Matt Anderson, President of Sound Devices. “We are excited to highlight this new brand to the international broadcast community, in addition to our range of audio gear, at IBC 2014.”

The network-connected PIX 270i and PIX 250i video decks offer significant advantages for production workflows, providing time-saving tapeless, file-based recording and playback with the ability to remotely control, set up and transfer high-quality files over Ethernet. The units record edit-ready Apple ProRes or Avid DNxHD files and allow simultaneous multiple-drive recording, giving production staff peace of mind with their rock-solid redundancy and backup capabilities (four drives for PIX 270i and two drives for 250i). Their extensive audio capabilities, including 64 channels of both MADI audio and Dante audio-over-Ethernet for PIX 270i (a world’s first for a video deck) and the PIX 250i’s 16 tracks of audio, make each unit a comprehensive, cost-effective tool for high-performance video capture and presentation.

Over the next several months, the company will brand all video-related products as Video Devices, including the PIX 240i, PIX 250i, and PIX 270i recorders. All future video products will also be branded Video Devices. This is a key step in a focused strategy to make Video Devices a dominant force in the video production and video integration markets.

Video Devices, a brand of Sound Devices, produces digital video recorders and related products that address a range of multiple-source video productions, including fast-paced, mission-critical studio applications, live sports, live events and mobile production. Sound Devices, LLC designs and manufactures portable audio mixers, digital audio recorders and related equipment for feature film, episodic television, documentary, news-gathering, live event and acoustical test and measurement applications. Founded in 1998, the company designs and manufactures both brands from its Reedsburg, Wisconsin headquarters, with additional offices in Madison, WI. For more information, visit the Video Devices and Sound Devices websites, www.videodevices.com; www.sounddevices.com.

Alan Dick Broadcast Develops DAB Systems to Satisfy Requirements of Hi-Profile Broadcasters

IBC Stand 8.B99

Click to schedule a visit to ADBL’s Stand
Technology will be Highlighted at IBC in Stand 8.B99

Gloucestershire, United Kingdom — Alan Dick Broadcast Ltd. (ADBL), a world leader in the manufacture and design of radio frequency components and antennas for radio and television transmission, will be highlighting DAB antennas at IBC that were designed to provide economic and space efficient solutions for some of the world’s most renowned broadcasters and Broadcast Signal providers. The DAB antennas will share the spotlight with ADBL’s new VHF BIII Mask filter/combiner along with the Company’s well-established UHF and FM units and towers in stand 8.B99.

“Environmental considerations coupled with zoning and planning restrictions forced the BBC to seek an antenna that could be fitted into the space occupied by existing FM units,” says Alex Perchevitch, President of ADBL. “Nothing suitable existed, so ADBL embarked on a development project to provide a solution that didn’t impact negatively on the FM antenna and met the specification for DAB. Two types of antennas were produced; the Shared Aperture FM Crossbow, and the FM Spearhead.”

The FM Crossbow antenna was designed for square structures and provides an excellent omni directional horizontal radiation pattern from an array of 4 panels mounted around a square structure. The FM Spearhead is suited for triangular structures and provides an excellent omni directional radiation pattern from an array of 3 panels mounted around a triangular structure. The DAB antenna elements were designed to be fitted onto the existing FM antennas without disturbing its installation or performance. The systems were range tested to optimize the RF performance of the combined DAB/FM antennas.

About Alan Dick Broadcast
UK-based Alan Dick Broadcast (ADBL) is a long-established global leader in the manufacture of antennas, combiners / filters, towers and broadcast infrastructure services for digital and analogue video and audio systems. Our portfolio starts at concept and runs through planning site development, station equipment, towers, antennas, and a full implementation and testing service. Additional information about ADBL may be obtained at: www.alandickbroadcast.com

ADBL contact: Sonia Del Castillo
mailto:sonia.delcastillo@alandickbroadcast.com

ADBL contact: Simon Williams
mailto:simon.williams@alandickbroadcast.com

Press Contact: Desert Moon Communications
Harriet Diener • +1 845-512-8283
harriet@desertmoon.tv

Media Group International Opens A New Training Academy

From September 2014, leading systems integrator Media Group International (MGI) will help broadcast professionals bridge the gap between traditional broadcast infrastructure and IT by delivering high quality training courses from its new Training Academy in Dubai.

Headed by Training Manager Joe MacQuarrie, an official ACSR Trainer who has recently joined MGI from Avid Technology Europe, the MGI Training Academy will provide the burgeoning Middle East broadcast industry with a unique educational opportunity. This unique facility will give broadcast professionals and engineers in the region access to a range of courses that focus on technical and operational systems and highlight how to use new technology in the most efficient way.

“As an Award-winning company with a deep understanding of broadcast and IT infrastructures and long-standing relationships with many of the industry’s key manufacturers, MGI is ideally placed to deliver the highly specialised training courses that our industry needs.” says MGI’s Managing Director, John Aslett. “Technology is advancing at a rapid pace and broadcasters who stay on top of these changes stand to benefit enormously, both in terms of time saved and creativity unleashed.”

Based in Studio City, the MGI Training Academy incorporates classroom facilities; a student lounge; a central apparatus room; a visualisation, pre-build, testing and acceptance area for projects, and two multi-use conference/training rooms that can be used for breakout workflow discussions or additional classroom exercises.

The Academy’s schedule of day and evening courses will encompass Project Related Technical Training for existing customers and public courses. Bespoke workflow design, training and consultancy are also included in MGI’s holistic approach, with courses provided either at the Academy or on location at a customer’s facility.

“In addition to courses on all Avid solutions, an example of the type of bespoke course we are developing is the Cisco Networking Boot Camp for Broadcast Engineers, which runs from October 5 to 9, 2014,” says Training Manager Joe MacQuarrie. “The course will be delivered by MGI’s Jim White, (CCIE) and a Cisco Certified Instructor with many years’ experience building networks specifically for TV. Although it covers the essential parts of the Cisco Certified Network Associate (CCNA) curriculum, the course also comes with a unique twist because we have enhanced the content so that it better meets the needs of today’s broadcaster. Pertinent topics like how to network broadcast systems are introduced, while less relevant subjects like Frame Relay have been removed.”

The Academy is also working with the International Association of Broadcast Manufacturers (IABM) to deliver its foundational courses, as well as offering authorised training for many different manufacturers in the broadcast industry.

For more information about the MGI Training Academy and for a full list of courses, please visit www.mgi.tv

-ends-

Notes to the editor:
About Ghanim bin Saad Al Saad & Sons Group Holdings
Ghanim bin Saad Al Saad & Sons Group Holdings (GSSG) was founded by Ghanim bin Saad Al Saad in 1993 and incorporated in 2007. Today it is one of Qatar’s most successful private sector business groups, making a major contribution to the country’s economic growth.
GSSG has enjoyed steady growth and success in many fields and industries locally and internationally. GSSG’s diverse portfolio gives it strength and enables its companies within the group to maximise global business opportunities wherever and whenever they arise.
The founder, Mr. Ghanim bin Saad al Saad, has enabled the group to grow to over 40 companies around the world. As an inspirational business leader, he has steered the group to achieve its success in industries that include aviation, maritime, automobiles, oil & gas, real estate, manufacturing, contracting and trading, finance & asset management, engineering, education, fitness, hotels, hospitality and fashion, information technology and telecommunications.
In addition to its corporate headquarters in Doha, GSSG also has five international offices located in London, Zurich, Cairo, Singapore and Dubai.
www.gssg.com

Media Group International
Media Group International (MGI) is an award-winning media broadcast and communications systems integrator, serving the media, telecommunications, security, education, hospitality and advertising industries in the Gulf region for more than 35 years. Formerly known as Salam Media Cast (SMC), the company joined GSSG Holdings in 2010, with offices in Qatar, UAE, Oman, Bahrain, Saudi Arabia and the UK.
Media Group International is diversifying its business into new technologies. As well as equipping professional television stations and studios, master control rooms, newsrooms, concert stages and theatres providing light and sound technology, the company also equips whole multivendor and multisensory environments. MGI provides solutions from safeguarding national security, such as in government operations, to creating the best educational venues in museums and classrooms, enhancing sports environments and revolutionising health facilities and satellite telecommunications.
Media Group International won the Digital Studio award for ‘System Integrator of the Year’ in March 2014. The company also holds ISO 9001:2008 certification, the world’s most recognised quality management standard. It is the first company of its kind to receive the prestigious accolade within the Middle East region, guaranteeing customers world-class quality assured products.
www.mgi.tv

Jünger Audio’s IBC 2014 Line Up Delivers Perfect Voice Recording

At IBC 2014 (10.A49), dynamics processing specialist Jünger Audio will show its D*AP4 VAP Voice Processor – a unique unit that is designed to make life easier for engineers working in radio stations, TV production voice-over studios and feature film ADR facilities.

What makes this processor so special is the inclusion of Jünger Audio’s proprietary Spectral Signature™ dynamic EQ – a totally new creative tool that offers automatic and dynamic EQ control to balance spectral differences in real-time. By analyzing incoming audio and comparing its spectrum with individually predetermined voice ‘fingerprints’, this clever unit can automatically apply dynamic EQ corrections to give a consistent sound.

For people working in TV voice over and feature film ADR, this facility is a Godsend because it allows them to deal with any changes in a performer’s voice. For example, if a performer has a sore throat on day three of a recording session and therefore sounds a bit different, this clever unit will look at the tonal characteristics of the actor’s voice on day one and automatically adjusts the frequency until both voices match. This ability to deliver consistent sound means that producers save money and time because they don’t have to cancel voice over or ADR sessions while they wait for an actor’s voice to return to normal.

Jünger Audio’s D*AP4 VAP Voice Processor is equally interesting to radio broadcasters who want to create an aural identity for their radio stations. By using similar spectral sound management principles, the unit measures the running program and uses the station master sound fingerprint as a reference. The Spectral Signature algorithm matches all different program elements to this reference signature, thus creating a dedicated ‘station sound’.

“The D*AP4 VAP draws on our extensive experience with previous Voice Processing devices such as our popular VO2, but adds new tools and algorithms to create an easier and more efficient approach to voice processing with no compromise in sound quality,” says Peter Pörs, CEO of Jünger Audio. “We have also included processing such as HP/LP filtering, versatile dynamics section, full parametric EQ and de-essing, and made the unit really easy to use – even for non-technical radio staff such as producers and journalists.”

Jünger Audio has also provided a dedicated voice leveler combined with an auto-mixer circuit to help mixed voice programs into loudness-based broadcasting on the fly. Using the optional SDI I/O card automated voice over for SDI embedded audio becomes an attractive feature of the D*AP4 VAP.

Connected as either an insert into a mixing desk or as a stand-alone unit, D*AP4 VAP offers interfaces that allow integration in existing environments via an AES insert. The unit can also be used with an optional analogue board that adds two high quality mic-preamps.

For more information about Jünger Audio’s D*AP4 VAP, please visit IBC stand 10.A49 or visit the company’s website at www.jungeraudio.com

-ends-

About Jünger Audio
Established in Berlin in 1990, Jünger Audio specialises in the design and manufacture of high-quality digital audio dynamics processors. It has developed a unique range of digital processors that are designed to meet the demands of the professional audio market. All of its products are easy to operate and are developed and manufactured in-house, ensuring that the highest standards are maintained throughout. Its customers include many of the world’s top radio and TV broadcasters, IPTV providers, music recording studios and audio post production facilities. www.jungeraudio.com

GP Marketing Awarded Broadcast Rep of the Year

GP Marketing won the Broadcast Rep of the Year Award at the Middle Atlantic sales meeting prior to InfoComm 2014.

Based in Redmond, Washington, GP Marketing represents Middle Atlantic Products for the Broadcast market in Washington, Alaska, Idaho, Oklahoma and Montana.

Commenting on the award, Middle Atlantic Broadcast Sales Manager Dave Amoscato said, “The main thing that made GP Marketing successful was really focusing on the marketplace and driving business from the end user to the sale. Spending the time to get specifications and doing what was needed to demonstrate and position Middle Atlantic product for key sales targets. They consistently created a lot of opportunities for us in the Broadcast segment.”

Photo caption (left to right): Dan Tarkoff, Whitt Adams, Middle Atlantic; Gary Ponto, GP Marketing, Inc.; Marco Colindres Middle Atlantic.

For technical specifications and in-depth information about Middle Atlantic Products, please click to www.middleatlantic.com or call 1.800.266.7225.

Middle Atlantic Products has been part of the Legrand group since its acquisition in 2011.

Legrand is the global specialist in electrical and digital building infrastructures. Its comprehensive offering of solutions for use in commercial, industrial and residential markets makes it a benchmark for customers worldwide. Innovation for a steady flow of new products with high added value and acquisitions are prime vectors for growth. Legrand reported sales of close to $5.8 billion in 2012. Legrand has a strong presence in the North American market, with a portfolio of well-known product lines that include Cablofil, Electrorack, Middle Atlantic, NuVo, On-Q, Ortronics, Pass & Seymour, Vantage, Watt Stopper and Wiremold. The company is listed on NYSE Euronext and is a component stock of indexes including the CAC40, FTSE4Good, MSCI World, ASPI and DJSI (ISIN code FR0010307819). www.legrand.us <http://www.legrand.us

Sound Devices 970 Brings Rackmounted Audio to InfoComm 2014

64-Track Dante and MADI-Equipped Multi-Track Audio Recorder Makes AV Debut

LAS VEGAS, JUNE 18, 2014 – Sound Devices, specialists in audio and video production equipment, showcases the 970, its first-ever dedicated audio-only rack-mounted solution, which boasts an impressive 64 channels of Dante and MADI, at InfoComm 2014 (Booth C6443). The half-rack, 2U device simplifies any application requiring high-quality, high-track-count audio recording, including live events such as concerts and sports recording, corporate events, houses of worship (HOW), studio and mobile production, as well as theater and museum presentations.

Sound Devices 970 records 64 channels of monophonic or polyphonic 24-bit WAV files from any of its 144 available inputs. Inputs available include 64 channels of Ethernet-based Dante, 64 channels of optical or coaxial MADI, eight channels of line-level analog and eight channels of AES digital. The 970 is a powerful tool for professionals who require a significant number of audio channels. Any input can be assigned to any track. In addition, 32-track recording at 96 kHz is supported.

The 970 records to any of four attached drives, which include two front-panel drive bays and two rear-panel e-SATA connected drives. Material can be recorded to multiple drives simultaneously or sequentially. This eliminates time-consuming post-record copying and allows for continuous long-form, high-track count recordings.

The Sound Devices 970 features an embedded Web-based control panel for machine transport and setup control over Ethernet-based networks as well as file transfer over the data network with SMB. In mission-critical audio-over-IP AV installations, where hundreds of audio channels are distributed between zones, setting up a redundant network to protect against loss of audio due to network failure provides peace of mind. The ability to have one drive transferring files over Ethernet, while another continues recording, offers significant production time savings. Corporate, HOW, theater and museum presentation videos that are created, edited and rendered remotely can be transferred directly to the venue.

File metadata editing of scene name, take name, notes, track names and reel folders can be done during, before and after recording across all drives. In addition to RS-422 and GPIO control, the unit also allows for format conversion between analog, AES digital, MADI and Dante, acting as a bridge and routing matrix between these types of audio I/O.

Sound Devices 970 is designed with a large five-inch screen for metering of up to 64 tracks and for fast and intuitive menu control. It also features the Sound Devices proprietary PowerSafe technology. PowerSafe circuitry has a built-in 10-second power reserve. In the event of power loss, the unit continues to operate for up to 10 seconds, then stops any file operation and shuts down. This ensures that a complete power loss has no effect on the recording. In addition, the 970 features FileSafe, which automatically detects and repairs corrupted file headers when drives are mounted. This occurs when a drive is inadvertently removed during recording, with the 970, simply reinsert the drive and it automatically repairs its files.

With its built-in, rock-steady Ambient Recording Lockit time-code technology, the 970 is well-suited to operate as a master clock. It can also slave or be jammed to any other time-code source. All common production time-code rates and modes are supported. The 970 also supports external synchronization from word clock, MADI or AES. To simplify the connection of multiple digital inputs, SRCs are available for all MADI, Dante or AES inputs.

Sound Devices, LLC designs and manufactures portable audio mixers, digital audio recorders and related equipment for feature film, episodic television, documentary, news-gathering, live event and acoustical test and measurement applications. Video Devices, a brand of Sound Devices, produces digital video recorders and related products that address a range of multiple-source video productions, including fast-paced, mission-critical studio applications, live sports, live events and mobile production.

Founded in 1998, the company designs and manufactures both brands from their Reedsburg, Wisconsin headquarters with additional offices in Madison, WI and Highland Park, IL. For more information, visit the Sound Devices and Video Devices websites, www.sounddevices.com; www.videodevices.com.

About

The Radio magazine The Wire provides information from manufacturers and associations about industry news, products, technology and business announcements. The information shown here is posted by companies and their representatives and are not edited or previewed by the Radio magazine staff. The content providers are solely responsible for the content of their posts. If you would like your company's news and information to appear here, contact us.

Calendar

October 2014
S M T W T F S
« Sep    
 1234
567891011
12131415161718
19202122232425
262728293031  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication